/ 中存储网

TSM 7.1 for Windows 最新版本下载及安装指南

2014-08-19 22:35:51 来源:中存储网

TSM 7.1.0.0 for Windows 最新版本下载及安装指南详细步骤,自中存储发布了TSM 7.1版本新功能介绍文章后,许多朋友联系索要下载地址。现在就提供TSM最新版本下载地址,具体安装要求检查端口,添加IP,翻译了一部分,剩下的大家自己看吧,挺简单的。如果还是明白,那就可以找个TSM 6或5.5的windows安装管理手册看看去吧(另附:TSM6.2.1下载地址)。

  1. 如果你是在防火墙后面,端口1500必须在防火墙中打开的备份客户端的工作。您必须添加TSM服务器的IP地址(198.82.161.186)到可信任的IP地址列表。
  2. 联系lau@vt.edu注册并获得一个节点名和密码。
  3. 登录到您的计算机,该计算机拥有管理员权限的帐户。
  4. 打开Windows资源管理器或文件管理器,如果存在ABC:tsm_images文件夹,删除ABC:tsm_images文件夹,(用安装Windows的驱动器的盘符替换ABC)。
  5. 安装TSM客户端
    1. 根据你的windows版本下载相应介质,TSM 7.1下载链接
    2. Save the installer file to your computer.
    3. When the download is complete, double-click the file to start the installer.
    4. In the user account control window, click the Yes button.
    5. To have the program installed to the default location, click the Next button.
    6. To use the installer in English, click OK.
    7. If prompted to install additional items:
      1. Click the Install button.
      2. Follow all prompts to install the required software and restart your computer if instructed.
    8. Click the Next button.
    9. To have the program installed to the default location, click the Next button.
    10. Select the Typical radio button.
    11. Click the Next button.
    12. Click the Install button.
    13. If prompted by a user account control window, click the Yes button.
    14. When the installation is complete, click the Finish button.
  6. Restart your computer.
    • If you are prompted to restart your computer, click the Yes button.
    • If you are not prompted to restart your computer, restart your computer.
  7. Download the dsm file.
    1. Go to the dsm.opt Web page.
    2. If prompted to enter credentials, log on with your full @vt.edu email address and VT Google Apps password. If you have forgotten your password, follow the instructions at Changing or Resetting Your VT Google Apps Account Password.
    3. If you see a list of files in your Drive, go to the dsm.opt Web page.
    4. Under Apologies. There is no preview available, click the Download button.
    5. Save the file to your computer.
  8. Open the dsm.opt file in Notepad.
    1. Click the Start button.
    2. Type: notepad
    3. As you type, results will appear and change. Select Notepad.
    4. From the File drop-down list, select Open....
    5. To view all files, from the Text Documents (*.txt) drop-down list, select All Files.
    6. Select the dsm.opt file you saved earlier.
    7. Click the Open button.
  9. Edit the dsm.opt file.
    1. At the top of the file, after NODENAME, replace xxxx.vt.edu with the nodename assigned to you.
    2. Example: NODENAME abcd1234.vt.edu
  10. Save and close the file.
    1. From the File drop-down list, select Save.
    2. Close all windows.
  11. Move the dsm.opt file to the appropriate location.
    1. In Windows Explorer or File Explorer, navigate to the ABC:Program FilesTivoliTSMbaclient folder. Replace ABC with the letter of the drive where TSM was installed.
    2. To move the dsm.opt file to the baclient folder, drag the dsm.opt icon to the baclient folder window.
    3. When prompted to provide administrator permission, click the Continue button.
  12. Start TSM Backup-Archive GUI.
    1. Click the Start button.
    2. Type: backup
    3. As you type, results will appear and change. Select Backup-Archive GUI..
  13. Confirm running the program.
    1. In the user account control window, click the Yes button.
    2. If prompted to unblock TSM:
      1. Place a check in the Private networks, such as my home or work network check box.
      2. Click the Allow access button.
  14. In the Password: text box, type the TSM password assigned to you.
  15. Click the Login button.
  16. Change your password.
    1. Near the top of the window, click the Utilities link.
    2. Select Change Password....
    3. In the Current password: text box, type the TSM password assigned to you.
    4. In the New password: text box, type a new password.
    5. In the Verify password: text box, re-type the new password.
    6. Click the Change button.
    7. Click OK.
  17. Perform a test of the backup process.
    1. Near the top of the window, click the Actions link.
    2. Select Backup.
    3. In the left pane, double-click Local.
    4. In the left pane, under Local, navigate to a folder containing a small file to use as a test of the backup process.
    5. In the right pane, place a check in the check box corresponding to the small file. Do not place a check in any hard drive check box(es), because you are only testing the connection.
    6. Click the Backup button.
    7. When the backup is complete, click OK.
    8. To verify that the test of the backup was successful, look for Failed: 0 which indicates there was no failures.
    9. Close the Backup Report window.
  18. Configure the backup scheduler. This step is only necessary if you have never installed TSM on the computer before.
    1. Near the top of the IBM Tivoli Storage Manager window, click the Utilities link.
    2. Select Setup Wizard.
    3. Place a check in the Help me configure the TSM Client Scheduler check box.
    4. Click the Next button.
    5. Click the Next button.
    6. Select the Install a new or additional scheduler radio button.
    7. Click the Next button.
    8. Place a check in the Use the Client Acceptor daemon (CAD) to manage the scheduler check box.
    9. Click the Next button.
    10. In the TSM acceptor name text box, type: TSM Client Acceptor Daemon
    11. Click the Next button.
    12. Click the Next button.
    13. Click the Next button.
    14. In the TSM Password text box, type your TSM password.
    15. Click the Next button.
    16. If not already selected, select the The System account radio button.
    17. Select the Automatically when Windows boots radio button.
    18. Click the Next button.
    19. Click the Next button.
    20. Select the Yes radio button.
    21. Click the Next button.
    22. Click the Apply button.
    23. Click the Finish button.
  19. Check the schedule log to verify that the scheduler has contacted the server.
    1. In Windows Explorer or File Explorer, navigate to the ABC:Program FilesTivoliTSMbaclient folder. Replace ABC with the letter of the drive where TSM was installed.
    2. Double-click the dsmsched.log icon.
    3. Look at the text to verify that the scheduler has contacted the server.
    4. Close the log file window. Installation is complete. Backup will run at the scheduled time between 6:00 p.m. and 5:00 a.m. If you have to turn your machine off overnight, send an email message to Eliza Lau at lau@vt.edu.
  20. Send an email message to Eliza Lau at lau@vt.edu with the DNS name of the computer and the name of the computer's owner.
  21. Set up open file support to back up locked files (such as archived PST files).
    1. In the IBM Tivoli Storage Manager window, click the Utilities link.
    2. Select Setup Wizard.
    3. Place a check in the Help me configure Open File Support check box.
    4. Click the Next button.
    5. Click the Next button.
    6. Select the Volume Shadowcopy Services (VSS) radio button.
    7. Click the Next button.
    8. Click the Apply button.
    9. Click the Finish button.
    10. In the IBM Tivoli Storage Manager window, click the File link.
    11. Select Exit.
    12. Restart your computer.
没有了